Some feedback is required on this issue as I will be making some small changes that will be influenced on how the power is entered into your logs - this applies mainly to the UK where for many years, a licence requirement was to record the output power in dbW and not in the conventional and globaly recognised 'Watts'
So, UK guys, do you...
Not enter power levels into the log, not now or never did?
Enter power levels in Watts?
Still enter power levels in dbW?
Have a log with mixed dbW and W?
Enter the power level with a pure number e.g. 10, 1000 or 10w, 1kw (etc)?
Thanks in advance
73 Colin G0CUZ
Winlog32 Author
PWR (Power) field feedback required (UK)
PWR (Power) field feedback required (UK)
Hi Colin,
I still use dbW.
73
Derek M1ARF
73 Derek M1ARF
I still use dbW.
73
Derek M1ARF
73 Derek M1ARF
PWR (Power) field feedback required (UK)
Hi Colin
I always use enter the pure number of watts with variations from digimodes to ssb.
Roy (G4ZNK)
I always use enter the pure number of watts with variations from digimodes to ssb.
Roy (G4ZNK)
PWR (Power) field feedback required (UK)
Hi Colin,
I still enter in dbw.
Regards
Rich G0BLB
I still enter in dbw.
Regards
Rich G0BLB
PWR (Power) field feedback required (UK)
Being Lazy I enter Watts hi hi
PWR (Power) field feedback required (UK)
I still use dbW i Sat the R.A.E
73'ws De G7LRR Andy
73'ws De G7LRR Andy
PWR (Power) field feedback required (UK)
Thanks for all the feedback guys
If you require the TX power to be printed on the QSL labels, the following is feature is available in v5.4.4 onwards,
By entering in QSL Label 'red' text '@PWR' - the '@PWR' string is replaced by exactly what is in the power field, there is also now an option to convert Log field dbW into Watts (rounded) if required.
So a typical entry in the red line of the QSL Label would be...
"ICOM IC-706 @PWR W ANT Dipole", this would print like....
"ICOM IC-706 100 W ANT Dipole"
If this is not required, you need to do nothing.
This feature is NOT available on QSL Card printing
This topic is now closed.
73 Colin G0CUZ
Winlog32 Author
If you require the TX power to be printed on the QSL labels, the following is feature is available in v5.4.4 onwards,
By entering in QSL Label 'red' text '@PWR' - the '@PWR' string is replaced by exactly what is in the power field, there is also now an option to convert Log field dbW into Watts (rounded) if required.
So a typical entry in the red line of the QSL Label would be...
"ICOM IC-706 @PWR W ANT Dipole", this would print like....
"ICOM IC-706 100 W ANT Dipole"
If this is not required, you need to do nothing.
This feature is NOT available on QSL Card printing
This topic is now closed.
73 Colin G0CUZ
Winlog32 Author