Hi Colin,
Here are some wishes:
1. Can it be possible to choose a printer driver that could be remembered between sessions? I have a laser and an inkjet. Winlog does not like the HP laser driver so I have had to resort to setting the default Windoze printer from Windoze as the Epson inkjet.
2. After the print icon is clicked on the QSL printing screen, could a simple test be done to warn the user there are no QSO's with Y or B in the QSL out field?
3. I recently used Winlog when operating GB2AVG and the Worthing club's QSL cards are a different layout to mine. I was going to put them through my printer. Could it be at all possible to chose a layout - there are 6 - so instead of using layout 1 as a default, the user could choose just one other layout for all QSOs?
Thanks in advance,
Terry.
QSL Printing
QSL Printing
Hi Terry,
1.
Had similar problems here with a laserjet printer (HP4M Plus). When I select print QSL the programme crashes.However if I use the same printer from another version of Winlog running on the shack computer, no problem!. I had loy=ts of email exchanges with Colin,but no resolution.
3.
I would also like the QSL label tied to the Log in use as I have three seperate logs from old locations and would like to print the appropriate information rather than have to redo the QSL info each time.
regards
Gordon
GI6ATZ
1.
Had similar problems here with a laserjet printer (HP4M Plus). When I select print QSL the programme crashes.However if I use the same printer from another version of Winlog running on the shack computer, no problem!. I had loy=ts of email exchanges with Colin,but no resolution.
3.
I would also like the QSL label tied to the Log in use as I have three seperate logs from old locations and would like to print the appropriate information rather than have to redo the QSL info each time.
regards
Gordon
GI6ATZ