LoTW Upload Trouble
Posted: Sun May 24, 2015 2:02 pm
After switching computers I recently installed Winlog32 V6.1.7 and TQSL V2.03. I can export and sign but when I try to upload to LoTW using the manual method I get the error:
Error: File NOT uploaded The system cannot locate the resource specified.
Possible LoTW offline.
And when I use the automatic method I see the following error:
TQSL: Command syntax error
A manual .tq8 upload may be required
If I use the super manual method however (open TQSL and click on the sign and upload button, select file, allow duplicates etc etc) then it WILL upload to LoTW. From LoTW Manager I can Export and Sign, and I can log into LoTW just fine. From searching the forum it seems that "station location" could be an issue but I have exactly the same callsign in both TQSL and WL32. I even re-typed it to make sure I didn't have the 0 vs O problem.
Thanks in advance for your assistance.
Error: File NOT uploaded The system cannot locate the resource specified.
Possible LoTW offline.
And when I use the automatic method I see the following error:
TQSL: Command syntax error
A manual .tq8 upload may be required
If I use the super manual method however (open TQSL and click on the sign and upload button, select file, allow duplicates etc etc) then it WILL upload to LoTW. From LoTW Manager I can Export and Sign, and I can log into LoTW just fine. From searching the forum it seems that "station location" could be an issue but I have exactly the same callsign in both TQSL and WL32. I even re-typed it to make sure I didn't have the 0 vs O problem.
Thanks in advance for your assistance.