Winlog32 Forums

I have just found out that the cluster program I use is compatible with W32 but I am unsure as to how I would go about setting up the connection!
Before I drop an email to Lee is there anyone here that uses the same cluster and, if so, can assist me in connecting the two?

I have tried but so far have been unsuccessful.

Regards,
Martyn-MM0XXW
Email = mm0xxw[at]gmail.com

Martyn,
Are you familiar with setting the WLNet? Once you have the DXCluster running, expand the WLNet window. Then click the third icon from the left (site manager). Now you need to insert or create a new one.
I set mine up as follows;
Site: VE7CC / Address: 127.0.0.1 / Port: 8101
The rest is user specific. Hopefully this helps.

73, John K2WLO

Many thanks John, I'll follow you're advice [:)]

All sorted and working as it should, many thanks again John [:D]