Hi Colin,
Would it be possible to include a way to restart the rotor control window without closing and restarting the whole program?
Once in a while, I forget to turn on the physical rotor controller box and the window shows an error. If it is closed it can't be reopened without restarting the whole program.
Thanks for your consideration!
73, Mike
K2CBI
Rotor Control Window
Re: Rotor Control Window
Hi Mike
I wasn't aware of a problem, but if you can let me have further info I will look into it.
First - what is the error reported?
Second, please check that you have the 'debug' option enabled in Menu/File/Maintenance/File Maintenance.
After the next error event, check to see if the error has been reported in the error event log (created by the debug option).
73 Colin
G0CUZ
I wasn't aware of a problem, but if you can let me have further info I will look into it.
First - what is the error reported?
Second, please check that you have the 'debug' option enabled in Menu/File/Maintenance/File Maintenance.
After the next error event, check to see if the error has been reported in the error event log (created by the debug option).
73 Colin
G0CUZ
Re: Rotor Control Window
OK, will email details.
Mike
K2CBI
Mike
K2CBI
Re: Rotor Control Window
Just to let people know - Colin pointed out to me that clicking on the antenna icon would re-open the rotor control window. I didn't know that. I only knew that it would rotate the antenna to the desired direction if the window was already open.
Thanks Colin!
73, Mike
K2CBI
Thanks Colin!
73, Mike
K2CBI