Error Quesstion
Error Quesstion
When I try to upload to LoTW with the automatic mode, the log goes to TQSL fine, but TQSL says syntax error, manual upload required. Any one have en idea what this may be??????
Error Quesstion
Hi
Thought it was me just having issues being new to LOTW
This is the error message that appears in tho Winlog32 LOTW window
TQSL: Command syntax error
A manual .tq8 upload may be required
73 Keith GU6EFB
Thought it was me just having issues being new to LOTW
This is the error message that appears in tho Winlog32 LOTW window
TQSL: Command syntax error
A manual .tq8 upload may be required
73 Keith GU6EFB
-
- Bit of a boffin
- Posts: 67
- Joined: Wed Jan 09, 2002 5:09 am
- Location: Stuttgart, Germany
- Contact:
Error Quesstion
Hi all,
I have the following setings in my setup window to upload TQ8 files:
https://p1k.arrl.org/lotw/upload?login= ... sword=zzzz
It works without problems here.
73 de Gerald - DL4KG
I have the following setings in my setup window to upload TQ8 files:
https://p1k.arrl.org/lotw/upload?login= ... sword=zzzz
It works without problems here.
73 de Gerald - DL4KG
73 de Gerald - DL4KG
Error Quesstion
Hi
I have just checked my settings and they are the same as yours
I have just run the LOTW automation and get the following message
LoTW automation Started: 2014-03-22 19:59:06
Exporting File: C:\Winlog32\Output\LoTW_GU6EFB_20140322.adi
Exported 2 Records:
SUCCESS
Signing file: C:\Winlog32\Output\LoTW_GU6EFB_20140322.adi
Station Location: GU6EFB
SUCCESS
TQSL: Command syntax error
A manual .tq8 upload may be required
Have also just found this error message
TQSL Version 2.0 [v2.0]
Error: The selected station location could not be found
Final Status: Commmand Syntax Error (10)
A manual update works fine any thoughts?
73 Keith GU6EFB
I have just checked my settings and they are the same as yours
I have just run the LOTW automation and get the following message
LoTW automation Started: 2014-03-22 19:59:06
Exporting File: C:\Winlog32\Output\LoTW_GU6EFB_20140322.adi
Exported 2 Records:
SUCCESS
Signing file: C:\Winlog32\Output\LoTW_GU6EFB_20140322.adi
Station Location: GU6EFB
SUCCESS
TQSL: Command syntax error
A manual .tq8 upload may be required
Have also just found this error message
TQSL Version 2.0 [v2.0]
Error: The selected station location could not be found
Final Status: Commmand Syntax Error (10)
A manual update works fine any thoughts?
73 Keith GU6EFB
Error Quesstion
Hi Keith et.al.
The problem is almost certainly the station location name as set in TQSL (the one you select when you manually sign the file.
The 'station location' in Winlog32 has nothing to do with the S/L in TQSL, it's an unfortunate naming convention, BUT both S/L must have the same name exactly for the automated process, for this reason I call my S/L 'G0CUZ' in both TQSL/Winlog32 and 'GJ0CUZ' for another log in both as an illustration, so whichever log is selected the correct S/L is sent to the TQSL function.
So inspect the name of the s/l in TQSL that you sign the file with and check it against the name of the S/L in Winlog32 if you have one, if not make one and call it the same, or change the name of the S/L in TQSL to the same as the S/L in Winlog32.
It'll work good when you do.
73 Colin
G0CUZ
The problem is almost certainly the station location name as set in TQSL (the one you select when you manually sign the file.
The 'station location' in Winlog32 has nothing to do with the S/L in TQSL, it's an unfortunate naming convention, BUT both S/L must have the same name exactly for the automated process, for this reason I call my S/L 'G0CUZ' in both TQSL/Winlog32 and 'GJ0CUZ' for another log in both as an illustration, so whichever log is selected the correct S/L is sent to the TQSL function.
So inspect the name of the s/l in TQSL that you sign the file with and check it against the name of the S/L in Winlog32 if you have one, if not make one and call it the same, or change the name of the S/L in TQSL to the same as the S/L in Winlog32.
It'll work good when you do.
73 Colin
G0CUZ
Error Quesstion
Hi Colin
Thanks for the pointer I have found my error.
The error was in my understanding of TQSL
in TQSL station location i had put Guernsey but it needed to be my call
I changed it and run LOTW and all run fine
Thanks again for the help
73 Keith GU6EFB
Thanks for the pointer I have found my error.
The error was in my understanding of TQSL
in TQSL station location i had put Guernsey but it needed to be my call
I changed it and run LOTW and all run fine
Thanks again for the help
73 Keith GU6EFB
Error Quesstion
Thanks for the tip. It worked. 73 de W5CF