Page 1 of 1

ClubLog upload error message

Posted: Mon Feb 26, 2018 4:02 pm
by g8hgn1442
Hi Colin,

Using latest V7.3.17

Just done some additions to my log and sent the new part off to QRZ & ClubLog.

QRZ was OK but got an error message "-2146697268 (800c0008)" download failed when trying ClubLog.

Is that likely to be at the ClubLog end? I went to the ClubLog web page and uploaded OK from there.

No panic as I can get the job done from the site.

73

Bob G8HGN

Re: ClubLog upload error message

Posted: Mon Feb 26, 2018 9:11 pm
by G0CUZ
OK Bob, I'll look into this when I am in the shack tomorrow.

73 Colin, G0CUZ

Re: ClubLog upload error message

Posted: Tue Feb 27, 2018 9:01 pm
by G0CUZ
Hi Bob

This function appears to be working OK here.

Are you using the bespoke ADIF export for Club Log with the direct 'upload' button.
Are you using the 'Clear Log' Option or 'Merge Log' option before committing the upload - I always use the 'clear log' option.

73 Colin, G0CUZ

Re: ClubLog upload error message

Posted: Thu Mar 01, 2018 8:18 pm
by g8hgn1442
Hi Colin,
Thanks for checking this.

Yes using the direct "Upload" button and the "merge" option. I've always used them and had no failures before.

It may be just a failure between me and ClubLog at the time. I uploaded OK using the ClubLog website facility.

I'm not on that PC ATM, so I can't check if it's still erroring.

I'll try tomorrow.

73

Bob G8HGN

Re: ClubLog upload error message

Posted: Thu Mar 01, 2018 10:24 pm
by G0CUZ
OK Bob
Let me know what happens, I just tried the merge option myself - which I don't normally use, but that worked OK for me too, so hopefully it was just an interrupted upload stream or something like that.
73 Colin, G0CUZ

Re: ClubLog upload error message

Posted: Fri Mar 02, 2018 3:29 pm
by g8hgn1442
Hi Colin,

I just tried a single dummy call entry, same error. tried to attach a screen grab but it doesn't seem to have loaded??

Then tried uploading a section of the current log and that did the same.

I'm using "File-Export-LOG-Adif-Clublog" and then choosing the contacts to load and then "Yes" to Export and "No" for Merge. That's the way I've always done it without any problems before.

So looks like something I've done here somewhere.

Did a "sfc /scannow" in Command Prompt and reported some corrupt files which it fixed most of, but some not. Tried another upload and was successful.

Seems my clearing old prog's out had messed up something.

Sorry I troubled you.

73

Bob G8HGN

Re: ClubLog upload error message

Posted: Sun Mar 04, 2018 7:18 pm
by G0CUZ
Thanks for the feedback Bob

Glad to hear all is OK now.

I Also saw there was still some maintenance going on at Club Log over the week-end, hopefully all will be back to normal soon.

Incidentally, I see there is now a new log-in procedure on the Club Log Web Site, this may require resetting of passwords!
If the Club Log log-in password is changed then of course it MUST be changed in Winlog32 Menu/Options/Settings - tab - Real-Time.

73 Colin, G0CUZ

Re: ClubLog upload error message

Posted: Sat Mar 17, 2018 12:23 pm
by g8hgn1442
Hi Colin,

Sorry for delay in replying.

Yes all OK now, probably me messing with old files.

I just logged on to ClubLog as normal. However it seems you can use your registered email or your callsign to login. My password didn't need changing.

73

Bob G8HGN

Re: ClubLog upload error message

Posted: Sat Mar 24, 2018 8:13 pm
by G0CUZ
Not connected, but FYI about the forthcoming Club Log security update.

As of April 1st (!) ClubLog is removing all access to the old HTTP API addresses previously used, only HTTPS will have access after this date.

The latest Winlog32 version (build 18) has the address changes (which are hard coded into Winlog32), so if you want to use the ClubLog look-ups or direct file upload from within Winlog32, you will need build 18 onwards to use these APIs.

This may have some impact if you are still using Windows XP?

73 Colin
G0CUZ