VE7CC Cluster

You may post here if you are having problems with Winlog32 that others may be able to help you with. You may also report bugs so that the author may act upon them.
Post Reply
MM0XXW
New user
Posts: 0
Joined: Thu Jul 29, 2010 8:39 am

VE7CC Cluster

Post by MM0XXW »

I have just found out that the cluster program I use is compatible with W32 but I am unsure as to how I would go about setting up the connection!
Before I drop an email to Lee is there anyone here that uses the same cluster and, if so, can assist me in connecting the two?

I have tried but so far have been unsuccessful.

Regards,
Martyn-MM0XXW
Email = mm0xxw[at]gmail.com
K2WLO
New user
Posts: 1
Joined: Fri Jun 10, 2011 8:46 am

VE7CC Cluster

Post by K2WLO »

Martyn,
Are you familiar with setting the WLNet? Once you have the DXCluster running, expand the WLNet window. Then click the third icon from the left (site manager). Now you need to insert or create a new one.
I set mine up as follows;
Site: VE7CC / Address: 127.0.0.1 / Port: 8101
The rest is user specific. Hopefully this helps.

73, John K2WLO
MM0XXW
New user
Posts: 0
Joined: Thu Jul 29, 2010 8:39 am

VE7CC Cluster

Post by MM0XXW »

Many thanks John, I'll follow you're advice [:)]
MM0XXW
New user
Posts: 0
Joined: Thu Jul 29, 2010 8:39 am

VE7CC Cluster

Post by MM0XXW »

All sorted and working as it should, many thanks again John [:D]
Post Reply