Hi
I would like to filter for a specific call sign in the cluster. For example TY1KS to see which bands-frequencies etc have been spotted. I tried messing around with a filter as suggested in the WLNET directions. I entered SET/FILTER K,VE/PASS as suggested for as test. This works fine, trouble is i am only getting spots from USA and Canada as the filter was designed to do.
Now, how do i:-
A. How do i remove the filter. B. How do i enter a filter to extract all spots for a specific call sign.
Any help appreciated.
73 and Thanks.
Tim
Filtering the WLNET (DX Cluster)
Filtering the WLNET (DX Cluster)
Tim, I am not sure I fully understand the requirement but.....
DXCluster Options - tab ALERTS - Alert Callsign
Enter the required Call(s) e.g. TY1KS
Double click on the Callsign box and select an Alert Colour from the Colour-picker - this will then highlight in the DXCluster display when Callsign is spotted.
Don't confuse SET/FILTER DXCluster commands with Winlog32 internal filters.
Use WLNET window to send commands to the DXCluster e.g. SH/DX TY1KS, results show only in WLNET window in this instance.
73 Colin G0CUZ
Winlog32 Author
DXCluster Options - tab ALERTS - Alert Callsign
Enter the required Call(s) e.g. TY1KS
Double click on the Callsign box and select an Alert Colour from the Colour-picker - this will then highlight in the DXCluster display when Callsign is spotted.
Don't confuse SET/FILTER DXCluster commands with Winlog32 internal filters.
Use WLNET window to send commands to the DXCluster e.g. SH/DX TY1KS, results show only in WLNET window in this instance.
73 Colin G0CUZ
Winlog32 Author