Simple question: Why won't the End Time auto fill when I click on the "END" button?? I must manually enter the End time for each QSO. However, the Start time autofills after entering the first couple of letter/numbers of the callsign.
W8TRN
End Time
-
- Bit of a boffin
- Posts: 67
- Joined: Wed Jan 09, 2002 5:09 am
- Location: Stuttgart, Germany
- Contact:
End Time
you have to go to the options menue - settings - time.... mark the field "display end time"... and it should work.
73 de Gerald - DL4KG
www.qsl.net/dl4kg
www.qslnet.de/dl4kg
www.mydarc.de/dl4kg
Edited by - dl4kg on 30/05/2007 8:54:49 PM
73 de Gerald - DL4KG
www.qsl.net/dl4kg
www.qslnet.de/dl4kg
www.mydarc.de/dl4kg
Edited by - dl4kg on 30/05/2007 8:54:49 PM
73 de Gerald - DL4KG
End Time
Yep John is correct, if you want the E Time on the left side where the QSO data in entered, you must click the DISPLAY END TIME in the settings menu, if you want the etime to appear in the log page on the right side you must check the etime box in the list of page view items,
Is that not what you were thinking John?
Seems to me if you wanted one, you would want them both, although Winlog seems to track the ending time whether you want it to or not, I don't use the end time and I checked the page view etime just now and there were all the ending times for all my 12K of my QSO's.
73 Bill K4FX
Is that not what you were thinking John?
Seems to me if you wanted one, you would want them both, although Winlog seems to track the ending time whether you want it to or not, I don't use the end time and I checked the page view etime just now and there were all the ending times for all my 12K of my QSO's.
73 Bill K4FX