Winlog32 Forums

New to PC Logging. Should the full rig frequency show in the MHz box (under the Start Time) when using CAT. Rig is talking to the PC OK but only shows frequency/frequency changes in the sub panel.

Mike

Hi Mike,

If you log a new contact the MHz box will be filled after hitting the "enter" key if the cursor is in the MHz box. If you are playing with the vfo knob on your TRX you see the changing frequency in the CAT window, but the MHz box stays empty. All fields in the QSO window work the same way. You must hit the "enter" key to fill the fields.

I hope I understood your questions right.

Hi Gerald,

Many thanks for your reply. Yes, you understood the question. I have tried your suggestion previously (and again tonight)
Hitting the END button does not fill in the frequency in the Mhz box and the log page shows blank entries.
Regards
Mike

Hi Gerald,

Hello again, many thanks once more for your reply. Problem is now sorted.

73

Mike G0CHV