DX CLUSTER DROP DOWN WINDOW

Discuss with others what you would like to see in later versions of Winlog32.
Post Reply
G0BLB
Keen user
Posts: 38
Joined: Mon Jan 07, 2002 8:53 am

DX CLUSTER DROP DOWN WINDOW

Post by G0BLB »

Hi Colin
When you are on DX cluster and you right click on call sign then click on DXCC look up worked I cannot see some times any information below 15m the drop down is full up with other modes from 15 to 1.8 ie psk 125 63 31 rtty usb cw is there any way you can make it into a double drop to get all information in.
Regards
Rich G0BLB
G0CUZ
Site Admin
Posts: 461
Joined: Wed Jan 02, 2002 7:12 am

Re: DX CLUSTER DROP DOWN WINDOW

Post by G0CUZ »

Hi Richard et.al.

Have revised the "look-up DXCC" pop-up
Not sure what largest number of w/c could give this problem but have set in two columns when required, temporary set to 15 per column, which I hope will (that's 30 rows of data), I can adjust this if necessary.
Will be in next release -probably December.
73 Colin
G0CUZ
G0BLB
Keen user
Posts: 38
Joined: Mon Jan 07, 2002 8:53 am

Re: DX CLUSTER DROP DOWN WINDOW

Post by G0BLB »

Hi Colin
Thank you for the latest update but my DX Cluster pop up window with the 2 columns with only 30 leaves me short by some times by 45 ie all psk rtty cw jt65 jt9 ssb working that dxcc on all bands is there any chance for column slider to cover all in that window so as to look up quickly if required.
Colin have a great Christmas and all the best for the coming year.
Kind Regards
Richard G0BLB
G0CUZ
Site Admin
Posts: 461
Joined: Wed Jan 02, 2002 7:12 am

Re: DX CLUSTER DROP DOWN WINDOW

Post by G0CUZ »

Hi Richard

Thanks for the wishes.

Understood about the pop-up/drop-down display, I have made a change for the next release, I have set the number of rows in the pop-up window to 16 (=32 rows of data) with a scrollbar enabled on the 2nd column if and when that is exceeded.
So there should now not be a limit to the amount of rows retuned, just the inconvenience of the scroll if necessary, a bit of a compromise but should be good for everyone.

73 and Merry Christmas,
Colin
G0CUZ
G0BLB
Keen user
Posts: 38
Joined: Mon Jan 07, 2002 8:53 am

Re: DX CLUSTER DROP DOWN WINDOW

Post by G0BLB »

Hi Colin
Thank you that will be great look forward to using it in a later update.
Kind Regards
73 Rich
G0BLB
G0BLB
Keen user
Posts: 38
Joined: Mon Jan 07, 2002 8:53 am

Re: DX CLUSTER DROP DOWN WINDOW

Post by G0BLB »

Colin GM
That new update is great thanks for the new box works great.
Regards
Rich G0BLB :D
Post Reply