With the versions 2.4 and 2.5 the QRG and mode will not come automatically if it is the same as in the previous QSO.
If I change the band and/or mode they will show OK.
Should I change something in my program?
Max OH2OT
QRG and mode
-
- Bit of a boffin
- Posts: 67
- Joined: Wed Jan 09, 2002 5:09 am
- Location: Stuttgart, Germany
- Contact:
QRG and mode
Hi Max,
as far as I know there is no way to change settings for this problem. There is only one idea. Do not forget to hit the ENTER key after every information you type in, also for the band and mode field.
I ran version 2.4 and 2.5 now without such a problem. If you use the TAB key the newer versions will not work as the previous ones.
73 de Gerald - DL4KG
www.qsl.net/dl4kg
as far as I know there is no way to change settings for this problem. There is only one idea. Do not forget to hit the ENTER key after every information you type in, also for the band and mode field.
I ran version 2.4 and 2.5 now without such a problem. If you use the TAB key the newer versions will not work as the previous ones.
73 de Gerald - DL4KG
www.qsl.net/dl4kg
73 de Gerald - DL4KG
QRG and mode
Fine!
Yes it works with enter.
It was faster with tab, but can manage with enter also.
Max OH2OT
Yes it works with enter.
It was faster with tab, but can manage with enter also.
Max OH2OT