Hi,
is there any procedure to start WinLog32 v2.0 with menu Database - DXcluster - Open (to automatically connecto to DXcluster) ?
Would be very handy.
73 de Maki S54M, N1MZ
Maki
Auto Database - DXcluster - Open
-
- Bit of a boffin
- Posts: 67
- Joined: Wed Jan 09, 2002 5:09 am
- Location: Stuttgart, Germany
- Contact:
Auto Database - DXcluster - Open
Hi Maki,
if you open the DX cluster "edit", you will find a button with "?". Press it and look for the "host" page. On this page you can check the options which will open the DX cluster when starting WL32. I am using the WLNET and it works very fine. WL32 routes automatically to the internet and connects the selected cluster node in the internet.
73 de Gerald - DL4KG
www.qsl.net/dl4kg
if you open the DX cluster "edit", you will find a button with "?". Press it and look for the "host" page. On this page you can check the options which will open the DX cluster when starting WL32. I am using the WLNET and it works very fine. WL32 routes automatically to the internet and connects the selected cluster node in the internet.
73 de Gerald - DL4KG
www.qsl.net/dl4kg
73 de Gerald - DL4KG