Import of ADIF from DXlab (DXkeeper) not possible?

You may post here if you are having problems with Winlog32 that others may be able to help you with. You may also report bugs so that the author may act upon them.
Post Reply
DF1LX
New user
Posts: 2
Joined: Fri Apr 17, 2015 11:33 am

Import of ADIF from DXlab (DXkeeper) not possible?

Post by DF1LX » Fri Apr 17, 2015 11:38 am

Hi,

I use DXkeeper for overall logbook until today - now I exported my whole log to ADIF (standard Version) which contain ~36k QSO.
Create a new DB/Log in WinLog32 and start "Import" - it see the ADI File - start anaylzing and show only "2" columns which are counted -> it counts the nr of Q correct but the import cannot be done.

Check with ADI file from N1MM/N1MMplus and BBlogger works great - but not from DXkeeper - I know how to do a conversion but I believe, such an Import should be possible too in WinLog32?

Greetings Peter DF1LX

G0CUZ
Site Admin
Posts: 1633
Joined: Wed Jan 02, 2002 7:12 am

Re: Import of ADIF from DXlab (DXkeeper) not possible?

Post by G0CUZ » Sat Apr 18, 2015 2:59 pm

Hi Peter

Thanks for the report.

I don't know what the problem is, but is you can send me a small snip of the file (10-20 QSO) including the header or even the complete file, I will run some tests on it and see what is wrong.
If sending via email, please zip the file.

I am presuming that you are using the current version of Winlog32?

73 Colin
G0CUZ

DF1LX
New user
Posts: 2
Joined: Fri Apr 17, 2015 11:33 am

Re: Import of ADIF from DXlab (DXkeeper) not possible?

Post by DF1LX » Sat Apr 18, 2015 5:57 pm

Hi,

yes it is the newest version 6.2.6

I cut some Q´s from the ADIF file and an Import was somehow possible.
BUT there seems a challenge - 2 empty Q´s at the start.
And if I import my BIG ADI with 36k Q it do not work.

You will get an Email.

Or I look if I can put a PN

Peter DF1LX

G0CUZ
Site Admin
Posts: 1633
Joined: Wed Jan 02, 2002 7:12 am

Re: Import of ADIF from DXlab (DXkeeper) not possible?

Post by G0CUZ » Tue Apr 21, 2015 8:26 am

OK Peter

Thanks.

I have not received the file yet, but look forward to working on the problem.

73 Colin
G0CUZ

Post Reply