probably pretty dumb, but new user.
entered about 10 qso's from paper log and all appeared in log window just fine.
when selecting one of them the info of that qso appears in the logging page on left just fine also..
now i want to get back to logging new calls but dont know how to get out of the selected call info other
than closing and restarting the program.
thanks Jim kw3u
log and logging window question
Re: log and logging window question
Just press the END button below of the QSO data fields.
73
Haris
SV1GRB
73
Haris
SV1GRB
Re: log and logging window question
found it that works.
another , the power level is at 100 or 1kw, can i change it to 30 or 40.
i know i could just type it in every time also.
jim
another , the power level is at 100 or 1kw, can i change it to 30 or 40.
i know i could just type it in every time also.
jim
-
- Bit of a boffin
- Posts: 67
- Joined: Wed Jan 09, 2002 5:09 am
- Location: Stuttgart, Germany
- Contact:
Re: log and logging window question
Go to Menue Options - settings - custom lists. Than add the power levels, modes etc. you need. Afterwards you can select the values in the logging window.
73 de Gerald - DL4KG